HYPERION ATLAS DH 20 FTD FULLY PROGRAMMABLE HIGH VOLTAGE DIGITAL SERVO

Hyperion Atlas High Voltage DH20-FTD Servo - 20 mm / 59.5 g

High Voltage Digital Servo
Fully programmable
Download Programming Manual
Download ATLAS Datasheet

Atlas Digital High-Voltage DH Servos. These run on 6.0V to 7.4V input, and are ideal for direct input via LiFePO4 or Lipo 2S receiver packs. And 2S models - such as many gliders and RC cars - can power the DH servos from the main power pack, saving the weight and hassle of receiver batteries or BEC units.

All Hyperion Atlas servos are fully programmable to define a range of important and useful features that will help you optimize your radio installation.

A total of 140 degrees available, plus 25% programmable by transmitter, means that as much as 175 degrees of throw can be obtained. So these servos not only guarantee as much control throw as you will ever need, but are also perfect for retract and scale hatch installations. Speed is adjustable from 1% to 100%, and 1% is VERY slow indeed!

No expensive programming box is needed to access all these useful features - it is a simple cable you attach to your PC.

	HP-DH20-FCD	HP-DH20-UCD	HP-DH20-FTD	HP-DH20-UTD
Servo type	High Voltage, fully programmable full size digital servo
Dimensions mm	40.0 x 19.5 x 39.8
Weight gram	46.0		59.5
Speed (sec/60 deg @ 6.0/7.4V)	0.16/0.13	0.19/0.16	0.16/0.13	0.19/0.16
Dynamic torque (kg/cm @ 6.0/7.4V)	8.0/9.5	10.5/12.0	8.0/9.5	10.5/12.0
Holding torque (kg/cm @ 6.0/7.4V)	16.0/19.0	21.0/24.0	16.0/19.0	21.0/24.0
Gear Train primary material	Carbon Poly		Titamium
Bearing	Double ball
Programmable	Yes, with free PC software connected via USB adapter (HP-AT-PRGUSB)
Rotation in degrees	Adjustable 30 to 140 degrees total, 90 degree default (45 each way)
Adjustable travel speed	Yes, 1% to 100% of Rated Speed (100% default)
Maximum input voltage	Loaded or unloaded input voltage should never exceed 8.4V