Cobra Brushless Motors offer performance and value for Sport Flyers and
Competition pilots alike. They are built from high quality components,
and are designed to give years of top-level performance. All Cobra
Motors are shipped in a custom designed package that features protective
foam on all six sides of the box, with 3 separate compartments to
protect the motor, accessory pack and cross mount.
The Cobra 3525 series motors have a 5.0mm shaft for extra strength, as
well as oversize ball bearings to support the shaft and provide a long
life. The internal bearing measures 11mm x 5mm x 5mm and the outer
bearing measures a massive 16mm x 5mm x 5mm! The stators are made with
0.20mm laminations for maximum efficiency and minimum Eddy Current
losses. Also included on the motor are ultra-flexible motor leads with
high-temp silicone rubber insulation and 3.5mm bullet connectors already
installed.
To complete the package, a complete hardware accessory kit is included
with every Cobra Motor. Included in this hardware kit are the following
items:
-
Heavy Duty 3mm Thick Cross Style Motor Mount
-
Four M3x6mm Motor Mount Screws
-
Bolt-On style threaded prop adapter with 3 screws
-
Retaining Collar with Set Screw
-
Three female 3.5mm bullet connectors
-
Three pieces of heat-shrink tubing
Click here for
Cobra C-3525/12 Propeller Data Chart
Cobra C-3525/12 Motor Specifications
Stator Diameter ................................... 35.0 mm (1.378 in)
Stator Thickness .................................. 25.0 mm (0.984 in)
No. of Stator Arms ....................................................... 12
No. of Magnet Poles ...................................................... 14
Motor Wind .................................................. 12 Turn Delta
Motor Kv .................................................... 650 RPM / Volt
No-Load Current (Io) ........................ 1.48 Amps @ 20 Volts
Motor Resistance (Rm) Per Phase ..................... 0.045 Ohms
Motor Resistance (Rm) Phase to Phase ............. 0.030 Ohms
Max Continuous Current ....................................... 52 Amps
Max Continuous Power on 4S Li-Po ...................... 770 Watts
Max Continuous Power on 5S Li-Po ...................... 960 Watts
Max Continuous Power on 6S Li-Po .................... 1150 Watts
Weight ............................................... 253 Grams (8.92 oz)
Outside Diameter .................................. 43.0 mm (1.693 in)
Shaft Diameter ..................................... 5.00 mm (0.197 in)
Body Length ......................................... 51.0 mm (2.008 in)
Overall Shaft Length .............................. 73.0 mm (2.874 in)
Items Included in Hardware Package
Cobra Motor Packaging
