UNIVERSAL MOTOR MOUNT AND PINION SUPPORT FOR 700E

UNIVERSAL MOTOR MOUNT AND PINION SUPPORT FOR 700E

Your Price: $56.95
In Stock
Part Number:AT700E-UMM
Material: Aluminum 6061-T6
Models
: all ALIGN TREX 700E series.
Note: the Universal Motor Mount provides the pilot the ability to run almost-all motor and gearing combinations available
for the TREX 700E, with the ability to adjust for 11T through 18T MOD 1.0 pinion sizes when meshed with the standard size,
115T MOD1.0 main drive gears.  With a unique Universal Motor Mount hole pattern, the design can accommodate all M4 x
30mm, M4 x 25mm, and M3 x 25mm motors on the market with a solid, four-bolt hole pattern installation.  Included in the
design is the adjustable Universal Pinion Support, which has an oversized, 6 x 17 x 6mm radial bearing for incredible strength, longevity, and durability for the high-power system of the 90-class electrics.
 
 Important: for proper operation of the Universal Motor Mount
assembly (alignment and strength of mounting hold), the length
of the side-rail screws is critical.  A maximum allowable length of
9.0mm (from the underside of the button head cap screw to the
end of the threads) is required for proper installation.  Check
your stock screws before installation and modify and/or replace
with aftermarket screws if desired (see Installation Diagram).
 
 Includes:  
- One (1) TREX 700E Series Aluminum Universal Motor Mount and Pinion Support Assembly
- One (1) TREX 700E Series Aluminum Universal Motor Base Plate
- Two (2) TREX 700E Series Aluminum Universal Motor Base Adjustment Rails
- One (1) TREX 700E Series Aluminum Universal Pinion Support Plate
- Two (2) TREX 700E Series Aluminum Universal Pinion Support Adjustment Rails
- One (1) Radial Ball Bearing 6 x 17 x 6 mm
- Two (2) M4 x 0.7 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Two (2) M4 Flat Washers (Zinc-Plated Alloy Steel)
- Four (4) M3 x 0.5 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Four (4) M3 x 0.5 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Four (4) M3 Flat Washers (Zinc-Plated Alloy Steel)

Finish
:
Clear anodize, mirror-polish CNC gloss

Weight:
 
53 g (design is FEA optimized for maximum strength and minimum weight)

ngevity, and durability for the high-power system of the 90-class electrics.  

Related Items

Recently Viewed Items