|
|
|
| Description |
* The only and the best 3D capable micro helicopter reduces the 3D flying cost (Even 7.4V/2S1P/LiPo battery can provide the most powerful maneuver than other helicopters which use 11.1V/3S1P/LiPo battery in this class).
* Only a short time needed for completion. (95% factory assembled)
* Preassembled kit comes with BL motor and 18A ESC.
* Equipped with CNC Universal Battery Plate provides more options to the C.G. adjustment and the installing of electronic gears.
* New CNC Alu Tail Gear Case and Double Joints Tail Slider produce precision and the best tail control.
* New CNC Tail Pitch Link Set with 4 Bearings which is limited edition for H200SE and H200FES version.
* New Auto-rotation Main Gear Set with One Way Bearing (Belt driven).
* New CNC Rigid Mixing Arms provide the high strength and rigidity to withstand crash.
* New CNC Rotor Head and Stop Plate.
* New CNC Mast Mount.
* New CNC Integrated Tail Boom Clamp and Middle Mount.
* New CNC Motor Mount comes with 2 motor mounts (Front or Rear).
* New CF (1mm) mainframe set which is suitable for sub-micro and micro servo (Such as the size of HS-45HB or HS-65MG servo).
* New CF Fin and Tail.
* New light-weight fiber glass painted canopy.
* High Performance Stabilizer Blades and Tail Rotor Blades.
* Kit comes with additional longer flybar produces quick response to 3D maneuver.
* High Rigidity Landing Gear Brace.
* The swash plate and the rotor head system equipped with all Precision CNC titanium anodized aluminum.
* Fully equipped ball bearings.(33~37 pieces of micro bearings)
* Seesaw head with bell-hiller system.
* CCPM collective pitch mechanism (variable pitch).
Specification:
* Overall length: 415mm (including cabin & canopy)
* Main rotor diameter: 428mm
* Tail rotor diameter: 100mm
* Motor: KV4800 brushless motor (included)
* ESC : 18A ESC (included)
* Flying weight: 260g ~ 280g (It may vary according to size of a battery pack and R/C gears.)
* Main rotor blades: 200mm SP Blades(included) or Wooden(option)
* Flying duration: 5~6 minutes with 7.4v/800mah Li-Po battery
Items needed for assembly:
* 6 (or more) channel heli-capable transmitter (with CCPM function)
* 3 Sub-micro or Micro servos for CCPM(Such as BMS 306BB or HS-45HB or HS-65MG servo)
* 1 Micro Digital servo for tail control.
* 6 (or more) channel micro receiver
* Gyro ( GU -210 heading hold gyro or higher level are recommended)
* Battery : Li-Po battery (7.4v~11.1v/800mah/15C or more)
* Charger: Li-Po battery charger |
|
|
 |
|
|
|
|
|
|
|
|
|
|
