|
|
|
| Description |
What the heck is a BEC?
Our Battery Eliminator Circuit is a little device that eliminates the need for a receiver and servo battery pack. It draws higher voltage from the motor batteries and drops it to a voltage level that is suitable for your receiver and servos. This is required in applications which draw high power for multiple servos or use more than 3S motor packs, as most ESCs with linear BECs are not designed for these applications.
CC BEC is better because it is smaller, cheaper, and far more powerful. |
|
Technical Specs
|
Current
Output: |
Peak: 10 amps
Continuous:
<12 volts input = 7 amps*
<24 volts input
= 5 amps**Ratings are determined with a 5mph airflow on the BEC. Servo connectors
are not rated for current in excess of 5 amps. Users are encouraged to replace
the connectors if more than 5 amp currents are anticipated. |
Output
Voltage: |
Output 5.1 volts out of
the package, user may set output voltage from 4.8 to 9 using the Castle
Link (sold separately). |
Input
Voltage: |
5v to 25.2v (2S to 6S
LiPo) |
Length:
Width:
Height: |
1.2? (30mm)
0.6? (15mm)
0.4? (10mm) |
Weight: |
0.4 oz (11 grams) |
|
|
 |
|
|
|
|
|
|
|
|
|
|
